• HMC7992 Switch Time Test

        In HMC7992 DataSheet ,The Switch Sppeed is 150ns(10%/90%RFout,TYP),My Question:How Many Power Level Input the HMC7992 Switch When Test the Switch Time.In the HMC7992 Data Sheet don't explain it !

  • HMC7992 DC blocking capacitors?

    The HMC7992 port specification says "...dc blocking capacitor is required on this pin". In our application we have three HMC7992 devices connected to each other. The inputs to the first HMC7992 that come from the signal source have DC blocking capacitors…

  • HMC7992 Frequency Range

    Hello,

    I'm little bit confusing about the frequency range of HMC7992. According to the datasheet, HMC7992 is Silicon SP4T Switch for 0.1GHz to 6.0GHA. But, we can see the following description in the General Description.

    "The HMC7992 has good low…

  • RE: UHF RFID 902MHz-928MHz antenna switch sp4t

    Thank you EricC,

    I chose the HMC7992 ic, It's working ok.

  • HMC7992 Use For USB3.0 Switch

    Dear All:

    HMC7992 we design on USB 3.0 data bus switch ,but USB2.0 test fixture simulator to fount rise time waveform abnormal ,why is there such a problem and why ,have any suggest to me refer. thanks...

    Best

    Jack

  • About the operating time of HMC7992

    Hi everyone who care HMC7992~~

    We have some question about the HMC7992。

    1、what’s mean about the SWITCHING SPEED in the datasheet Page 3 of 13?

         “ tRISE and tFALL” means the rise and fall time of “digital control inputs ” ?…

  • RE: HMC7992 Switch through path Maximum power handling for OFDM

    Hi Sugumar,

    The 3.3V and 5V recommended operating conditions and absolute maximum rating is given in the datasheet. Please refer to pages 3 and 5 of the HMC7992 datasheet. You may also want to look at ADRF5040; it has slightly better power handling than…

  • About the HMC7992's power handling

    Hi everyone.

    What's mean about the "High power handling"  in the datasheet of HMC7992. Can I think it is the P1-db equaly in some time. 

    BR to you

  • Where are the s-parameters for the HMC7992?  Do they extend beyond the freq specs of the device?

    I am looking for s-parameters for the HMC7992 SP4T RF Switch.  Do they extend beyond the 100MHz to 6GHz specified range for the part?