The ADG419-EP is an Enhanced Product for defense and aerospace applications that follows the AQEC standard. (See this link: https://www.analog.com/en/applications/markets/aerospace-and-defense-pavilion-home/aerospace-defense-capabilities/high-reliability…
There is no spice model available for the ADG419.
One option is to use the ADG411 Spice model. The ADG411 is 4 xSPST so you can use 2 channels and tie the outputs together to replicate an SPDT. The ADG411 has the same core switch design as the ADG419…
Yes, the same advice applies to the ADG444 as the ADG419.
Does this kind of device have protection diodes, both positive and negative clamps?
If I do continuity (open/short) test, grounding all pins, what value of current should be applied to the pin under test? And what voltage limits there are for this test…
Please excuse me to ask a question about an ADG419 applicayon under unusual operation condition.
I have to ask.
The part is operated from VDD=VL=+9V, VSS=GND=-9V, and S1, S2 ,D =-1V to 7V.
VIN is driven by +/-10V source with a 10kohm current limiting…
I'm studying a new electronic sensor applications. I would use the ADG419 to switch analog signals. The ADG419 will be control by a µC.
Vsupply µC Digital : +3.3V to GND
Vsupply Analog: +5V;-5V;AGND
I would know if my schematic…
Can some one supply ADG419 spice model for me. I need it to simulate my circuit.
Thanks in advance.
I am trying to use the ADG419 in a FSK configuration at the out of 2 oscillators, but I am experiencing severe crosstalk to the output making it unusable to drive a transmitter. Data rates are typically 9.6 KB/s or higher. The RF frequencies are in t…